Por defecto la tarjeta de red no está configurada, y hay que conectarse con el cable que viene con el sai (940-0024C) usando hyperterminal 2400,8,none,1, no flow control.
La usuario por defecto es 'apc' y password 'apc'.
Si además estas configurando Powerchute Network Shutdown, necesitarás la palabra de paso 'admin user phrase'.
Para conectarte al equipo en que has instalado Powerchute network Shutdown debes conectarte a la ip de tu equipo con http://x.y.z.a:3052 y utilizar de usuario y password 'apc'.
Friday, July 24, 2009
Tuesday, July 14, 2009
How to set ESX Host into maintenance mode from Service console
Esta es la forma de poner un esx en modo mantenimiento, es un post de techstarts publicado en: http://vmzare.wordpress.com/2007/08/24/how-to-set-esx-host-into-maintenance-mode-from-service-console/
Below is the command which you will have to execute from SVC Console to enter host into maintenance mode:
vimsh -n -e /hostsvc/maintenance_mode_enter
To exit maintenance mode:
vimsh -n -e /hostsvc/maintenance_mode_exit
Now next question is how I check whether host is in maintenance mode. Here is it…
vimsh -n -e /hostsvc/runtimeinfo |grep inMaintenanceMode |awk '{print $3}'
Below is the command which you will have to execute from SVC Console to enter host into maintenance mode:
vimsh -n -e /hostsvc/maintenance_mode_enter
To exit maintenance mode:
vimsh -n -e /hostsvc/maintenance_mode_exit
Now next question is how I check whether host is in maintenance mode. Here is it…
vimsh -n -e /hostsvc/runtimeinfo |grep inMaintenanceMode |awk '{print $3}'
Subscribe to:
Posts (Atom)